Yak farbuvati solone tisto. Children virobi from salt dough: recipe for cooking and tsikavi ideas

It is necessary for robots

For the dough Zagalny recipe:

• Borosno - 2 parts,
• Sil "Extra" - 2 parts,
• water (obovazkovo cold) - 1 part,
• polyethylene package for taking dough,

Є Різні recipes for salt dough. For example, in one of them, oil is added to the oil. However, play fat video beats in a wide variety of vipad. In some recipes, add some wine glue. With the dough, prepared for such a recipe, it will be necessary to protect it even more, especially if you use it with small children. Aje glue is toxic, and babies love to try everything "on the tooth". Our recipe is based on 100% ecologic and baked-free materials.

Immediately it is necessary to mean that for robots with solonims the temperature regime in the room is required. The optimum temperature is 20 ° C. When the temperature is high, it’s just dry, it’s important to get rid of the details.

For a robot with a dough, you need to know:

• a jar of water for the sensation of fingers and penzlik,
• stacks,
• plastic nіzh,
• board for lime,
• rolling pin for rozkochuvannya testa,
• brushes,
• farbi,
• toothpicks,
• dugout (for registration of "cleansing")
• manicure knives with rounded edges.

You can also know the best of the best cinnamon speeches, such as straws for a cocktail, kharchov foil, a hole in the middle of pills, beads, black peppercorns, small pouches of felt-tip pens.

first recipe

Boron wheat - 2 flasks
Sil "Extra" - 1 glass
Water -3/4 flasks

another recipe

Boronno wheaten - 1 bottle
Sil - 2 flasks
Dry trellis glue - 1 spoon
Water - close to 1 bottle

At a wide bowl, sprinkle some water, add some water, then pour it in. Mix everything up. For good, mix the power well, step by step add cold water until the one-sided mass is removed. Cooked just innocently to stick to the hands or cry. It is just to be guilty of being elastic and twisting to finish. Put the yogo in a yaku-non-umnist or in a polyethylene package, you didn't hang out

Dovgo zberigati is ready to be very unimportant, for that one should get involved in this first color: it’s old siruvatim. If you want, it is also possible to vikoristovuvati for decoration of details or other embellishments.

It’s just enough to cry - give me some water. Yaksho stuck to the hands - the trocha is borosna.

Solon is just, it’s lacking in an obvious viglyad, it dries up even more quickly, so you should trim it with a shave. Put the uncured dough in the refrigerator, where it can take a day or two.

Do not sleep in a cup of everything at once, for a cob of plenty of everything. More and more tools will be added and more and more will be added. Your hands will be your head instruments!

YAK hanging virobi from salt powder

On an incredible turn at room temperature

Visushiti virib is possible on an open basis in a dry mix. Chim virib tovschі, it will take more than an hour. Finding a way of the most economical.

Drying for meals manually in the summer hour, for example, at the dachas. However, take a trip to uvaz, when you get dry on the surface of the virob, as you contact with the table, you pretend to be lost.

At the spirits (gas or electric stove)

When ready to hang, carefully, with the help of a wide knife or a scapula, transfer it from the working table to sticking with a heavy deco, do not magnetize when transferred.

To dry for two days a self-box with a sprinkle on an open wind, warm in the oven at a temperature of 50 ° C, gradually increasing the temperature, but not even more than 150 ° C. When the temperature is too high, it can be swollen, sometimes there are tremors. The bloated virobi vypraviti does not grow out, and the tricycles are easy to smear. For the sake of breeding trochas with water, add PVA glue, kindly mix and apply the masu on the trischink, then rub it with your finger or rub it with your finger.

Virib is not guilty of losing Sirim. Yogo readiness viznachayut by sound. Having tapped the finished virob with your finger, you will feel a ringing sound. As the sound is deaf, virіb needs to be dried.

For great virobs, you can choose a combination of drying: a bunch of days for every day, then - in the spirits.

Drying hour in the electrical plate

1 year - at t 50 ° С
1-2 years - at t 75 ° С
1 year - at t 100-125 ° С
0.5 years - at t 150 ° С

It will take more than an hour to dry out common robots.

The hour, which is known for drying the virobes in the spirit, is definitely important. All ovens are built one to one. Tom, moreover, less tweaks from the transformed robots, grow a little bit of zrazkiv, for example, eat the cakes of food and dry them in your spirit, change the temperature.

For that, yak figurines from salty tea hang in the spirit, cool down. Leave the virobi hot, the stench is even worse, so walk around them carefully.

On an opalescent battery

In this way, in a twofold way, you will be charged if the batteries of the central heating are well heated. Place the self-box on the foil or fabric and fill it on the battery until it is dry again.

1. The virobi were well taken care of, for that the stench would be dried and rosefarbovan, cover them with a bright varnish. It’s worthwhile to take care of them all in theology. If it doesn't look like a mirror blisk, then pick a matte varnish.

2. Vikoristovuvati is not recommended for drying microkhvilovu.

MODEL VIROBIV from salt dough

Draw the details manually for the help of the penzlick and drive. Water falls into the glue. Apply a small amount of water on the surface of the parts with a penzlik, so that it squeezes and gently squeezes them one to one, do not get wet. As soon as you go to see it, it’s a lot, but you can grow up.

Ісnє a number of main advantages of the film. At the heart of the preparation, it is practical for all the elements to lie a bag and a cowbass.

To embellish the virobes from the salty paste, you can use the simplest other elements: quotes, lines, berries, leaves, pigtails, etc.

To prepare a leaf, it is necessary to download a cowbass, distribute it to the same parts-cylinders, which then later download to a bag. The ball needs to be flattened into a biscuit and form a sheet with great and good fingers. The veins can be fished out with a toothpick.

Trojandochki can be wiggled from thinly rocked lines, carefully screwed onto a toothpick. At the same time, the required size and form of the quota are formed.

When preparing figurines of people, the basis is to serve as a cowbass, which needs to be shaped like a cone. For head sticking, pick the bag from the necessary size. Bigger folding area elements, or figurines, are more beautiful than the ones that are rocked just according to the previously prepared template.

The limestone from the salty dough is not only hot, ale and fiery corisne rozvaga. I will paint the dibs of the handles, I will help the fingers and the wrists, and in general I will calm the nervous system. Tom won’t be brown only for children, but we’ll grow up.

Gotuumo i farbuumo tisto

3 such quotations you can store different types: heart, sonechka, or just embellish the leaf with them. Before the speech, from the very thin and thin "cowbass" you can work very easily: frames, khvili, wood and large folding vіzerunki.

Turn on the fantasy!

Check out, leave the figurines DO NOT overtake. Pislya tsyogo make cardboard glue and distribution of them on lists.

The magnet for the refrigerator is a wonderful detail for the interior!

Another tsikava idea: a magnet with a child. You know: small magnet, solone tisto, farbi, biser і namistini. It is just more beautiful to be fabulous at once and vicariously in robots in the same colorov.

distribute the dough into two pieces. In one place, make a flat figuru (you can get a pretty one: a heart, a mug, a snake).

Another part of the test can be divided into parts. Let the youngsters roll up the "cowbass" - they will be used to fold the literi. The child has grown up, you can fit in with the cim and himself, and in the child's garden it is better not to help the dad.

Attach the letters to the first part of the workpiece.

Sip the workpiece with a bead, paint it with namistins, and plant the lights of the dish. Zalishte dry on the battery, or vistavte somewhere on the sonechko. Do not put the workpiece in the oven taku dye.

Baby bags ...

Lіplennya z salty tista - miracle of busyness, yake develop uya, and train your hands.

Experimenting with the dough can be done very well - it’s very easy to take form, it is great to crumple and farm.

Those figurines, especially pidrum'yaneni, miraculously see in the role of a little toy, and in the quality of any kind of virob.

Before the speech, if you have lost three of the dough - do not sleep over wikidati. Put it in polyethylene packaging, tighten it up and save it until the next time. Won’t you stand there for the next time!

Even more important:

When virobates are set at once with the most suitable children (they can "suck" just in the mouth) - pick only natural barvniki. Remember, that the robot with the piece barvniks (chemistry) may be useful for your baby.

Z There are two main ways to make a self-box in a profitable way:

1. About crashing the dough when preparing it is a great plus. At the end of the stage, you can go to the ideal barn without the risk of obstructing any details, as can be done when the artist does not know much about it. It’s not difficult to find farms of importantly accessible places.

2. About crash of ready-made virobes . Gouache is ideal for the whole method, ale and acrylic farbies may also be used for applying additional paint on the previously coated surface.

Before in addition, we can . In general vypad vyrіb pіdrum'yanitiysya and matima even accept viglyad. also possible .

D For a color change, it is possible to choose a variety of farbi: gouache, acrylic and tempera, masni farbi or color food additives, a farbou for farbovans for great food. To remove the brown color, you can choose a retail café and cocoa brews with sprinkles and coolings, and the people of the color can take a great care of them. To that ...

we recommend to you vikoristovuvati for the first farbuvannya ready-made virobu and substitution test G u a w b — і More than that є by the most ideal universal method, like for the dough when cooked, and for the first ball of the dough when cooked (hanging). It’s even easier to talk and get ready.

Let's do it the first way.

About farba vyroblyaєtsya at the stage of deprivation. Farb needs to be replaced with dry forest, depriving him of three additional water and efficient mixing. Drink the water and take it to the same color. As long as the zavdannya polyaga in that it grows just because of the "marmur effect", then it’s guilty to end if the color is not one-sided but rather small. For ts'go mi, it was recommended to add the farbah to the final stage of the day. Growth of color trends is offered by the way of change. Allow to finish adding a few decals of the main colors: chervonia, blue, greens, black, brown, zhovty and extravagantly beads, and you can practically use it as a color. Fioletovy color to finish folding. Yogo can be trimmed with a path of blue into rhyme. We will talk below about the ways of making colorants with natural barvniks.

Farbuvannya of ready-made virobes.

H Let's start with the fact that the virib is guilty but it has been dried. Vikoristovuvati needs fading brushes, but for thin robots fading and most thin brushes. Remember to lay down even more than a lot of brushes, and in the first place the accuracy of the farbuvannya virobi. The hairs of the brushes can be rubbed into the small sides, and you can press the neo-hinny viglyad to the viroba. Farbuvannya treba viroblya borderline neat, so do not obstruct any details of the virobi. I yak vie melodiously guessed - the skin part is farted okremo. Farba for the inflicted guilt is not even thicker, ale and not rіdka (schob didn’t have a patyoka). To lie down is guilty of an equal ball, pokryvayuchi pryvnomirno over the surface, scho to fart. Ridka of a farb is permissible only once, if you apply a thin ball to add an additional color to the previously welded surface.

І so, with a pair of leather parts with the main color. Chekaєmo poki virib visokhne. Then you can apply additional babies. For example, funny ones, or chervony cheeks, on matrioshts, yaskravs on feathered birds, vusiks on muzzles, or dogs, and so far. You can add dark colors in shadows and light displays on opulent monsters. You can waste і zmіshuvati farbi directly on virobi, іt is possible to smoothly transition from one color to the other. Especially garnishing way of barb for great virobes without additional details.

Korisna is happy:

For the cob, it is robust to finish with the mother of two brushes - tse No. 10 for the farbuvannya of the great dalyanoks and No. 1-2 for the larger delicate robots.

Farbuvannya dough with natural barvniki. In the first place for the little ones!

D For children, it may not be safe for the health of the victorian of piece barvniks, that gouache will not be cinnamon if you want to indulge in the middle of the child. It is also recommended that you speed up with natural barvniks. Chi will not become a scary child, just a little bit of dough that is cooked up, for example, with carrot juice. Farbuvati is more beautiful itself. Natural farbies are not very bright for food and children are not too bright for the dough of old colors, and not one-sided color. Otzhe, warm colors are lighter than vigotoviti. zhovty kolіr daє carrots sіk. chervonia can be trimmed as cherry, crane, beetroot and raspberry juice. Dodajmo juices in tisto ... Schob otrimati orange finish the zm_shati chervonia і zhovty. The same rank gotuєmo cold colori:greenery - yes sik spinach,blue - chornitsya abo lohina, andviolet - black currant juice. You can experiment with quotes and ask for even the original ones.

V In front of us there are still a lot of small farbuvannya subtleties, which can be seen in the process of robots, and we will move on to.

One of the ways to learn lipiti is virobi, sculptures, panels, picture frames, figurines, with your own powerful hands - very fast. So, in Russia, figurines from the salty tist used to stick to the children for the gris, order from the tree. I would like to see that the figurines from the past in deyaky vypadki stasovuvali to navit for singing rituals and ceremonies. In a viglyad, the gift of a woman carries in her a sign of prudence, blessed wait, for the safety of the family.
In the given hour, the possibility of a figurine's life is more easy, affordable, economical, material at all times for the preparation is easy and fast.

Yak prepare a little bit for lylennya virobiv

There are a few ways to prepare enough for making virobes. take:
- 0.5 flasks of wheat bush; 0.5 flasks of everyday life (it can be stashed one-sidedly, in the case of a life-like life, if there are mothers of old);
- 1 bottle of salt (Sil is more beautiful than my brothers, one-sided, without breasts. If sil is great, then it will be possible to find a difference in the water, as you will fill it well);
- 0.8 flasks of water (Water supply in a simple step, do not force it all at once, it’s not nice to give it to it, but the axis is more foldable. Keep the water in the heat;
- 2 tablespoons of dry tapestry glue (based on modified starch).
In some cases, glue cannot be stuck with glue, if you have small children that can taste just for gusto, then for tapestries, glue is more vivid, so as in a new one can be used barvniks - markers, additives. The glue can be replaced with starch. You can add 1 tablespoon of dormouse olia to the starch. Krochmal or butter give the dough the flexibility, the capacity of the leaf is more foldable, it can be used only when the figurines are hung.
As an alternative to the dough of whip cooked, look at the possibility of adding dough to the dough in specialty stores, as a rule, it is more expensive, but it is also made in the same color.

Yak pofarbuvati just for making figurines in the color you need

There are two options here. The first one to make it right at once and once and for all of the elements of the figurine with the singing color and other growth of the production of the virobi in the process of melting. In that and in the first place, there are available gouache farbi. You can store acrylic farbs. The watercolors of the farbi do not go, so as the concentration of the color, as it is so small, the figures of the vikhoditi blidimi are so small. Farba is to blame for the consistency of the cream; It is also possible to sell food items in grocery stores.
And so, for that purpose, make sure to make it right into the singing color, take it into the hand, open it up, break the sphere. Look in the center of the spheres with openings, add a farb (barvnik) to the center of the dough, and some of the dough that you need, repeat the operation as long as you can. Close the openings and repair the breasts. Roll, mix, drive and attach new knowledge to the home, until quietly do not take off the color.
As long as you have only the color of the farbs, then you can expand the color palette for your virobes by means of special changes and changes. Take two pre-cooked shmats to the dough and grind them to one-sided camp. So zmishuchi:
- blue and bilious, remove the blakitny;
- bili and chervonia bude rhy;
- blue and erythematous give violet;
- blakitny and zhovty become green;
- zhovty and chervoniy turn into orange;
- greens and chervonia turn brown;
- greens and blue to be branded just into smaragdovia;
- to prepare a paste of white color in a light-pink color, add a trocha.
You can use non-private barvniks for victorious and non-private colors, so for office supplies you can add glue to a crispy one, for example, gold;

If it is possible to drink virobi from the test of preparation and preparation

For that, you have prepared it just and you can easily make it into the color you need, do not go and fix it all at once. It is better to take out the polyethylene package and put it in a new one, so the doctor didn’t get it. Let the youmu sit for 2-3 years, you can put it just on the fridge. As a result, the consistency of the stock dough will become even more one-sided, the gluten will take place in the bush process, and it will be more beautiful to stick together. Now ours is ready for stitching.

Technology and specialties of virobivs from salt dough

Immediately I want to say, well, of course it's not plasticine, here you won't be tempted to go for high plasticity, screw up the price. Most of the scale is not folding in the shape of the elements and figurines. In general, you can use the technique of molding from plastic or clay, use plastic knives for crumbling the dough on the warehouses, shovels for the stem of the shelf surfaces, and clean the folds on the figurines and the crumbling grain.
It’s pretty quick to tell the doctor, so that in order to preserve its plasticity, until the moment of an unprecedented slump, trim it in a closed space, for example, in a jar, or we’ll light it up in polyethylene.
When gluing from the paste, for a shorter adhesion of the elements, and also for that, the water does not stick to your hands. Hourly every hour, soak your hands, or scrape the seam with water, so it will help you to get rid of a number of possible technological problems as a result of the lapse of time.
For the preparation of new figurines from the past, you can use a bead, rhinestones, etc. With a lot of varto, I respect those who are guilty of stink, but because of the plastic, in the future you may have problems with the viping of ready-made virobes.
For folding figurines and cantilever parts, the virob can be used as a frame. For the frame of the virob from the test, good for the transformer, the middle diameter is 0.5 to 1 mm, it will be thinner than it will be thinner, it will be overwhelmingly hard. Spoon Roll up the frame, in the skeleton of the figurine, and in the past you covered it with dough. The miraculousness of the virobi with the frame will be an order of magnitude lower without it.

Sushinnya, vipalyuvannya and rosefarbuvannya virobiv from salt powder

Virobi does not require any special drying technology. So the figurines can completely harden at room temperatures, often it is important, so how to maintain a balance in terms of volume between the inner and surface balls, so that the figurine can be created as a result of rosetting. The figurines can be cast in such a view.
If you have respected on vipal, then vipal figurines will be carried out even after drying, if figurine on the surface you need to be dry, do not sleep, if all the same, as a rule, there may be no more vologue, more Dry the virobi with a hundred reserve for an hour. The dried crumbs will be left in the same form of figuri, and then the ball will be dough. Drying is carried out in a small room temperature, without flowing out stretches and straight sleepy exchanges.
Vipal is carried out in a spirit at temperatures of 50-60 degrees, the wine is allowed to be left out of the internal vology, gluten in the dough in one whole. Do not set the temperature to the high temperature for the vipalu, but you can start at the newest color, or change the shape of your virobi. An hour of vipalu also serves as an individual drying and layering of the form of a virobi and of the dough.
If you rozfarbovuet virib for drying or vipala, then prime the surface before farbuvannya. The soil on the surface of the dough dries up and saves the amount of farbi in case of farming, as well as to simplify the technology. The number of balls in the case of farbuvannas, in order to reject the required view, it is significant to speed up. For priming, it is possible to use PVA glue, which is thick glue to dissolve near the water. Dry the soil and proceed to the farrowing virobi from the test.
For surface farbuvannya vikorystovy farbi also, and for the overwhelming farbuvannya masi dough - acrylic, gouache. Let the farbs dry. For painting farbuvannya, you can cover the virobi surface with acrylic varnish from a spray can or using a penzlik. We can paint with varnish, we will be more addicted to the viglyad from the virobes, and we will also be stolen more, you can wipe the saw with a vologo ganchirka without being afraid.

In the Internet, there is much more information about those, like zishuvati solon just, like from new life, but at the same time - there are not many people who share their wonderful other secrets on robots with a lot of cyclical material.

This year you will learn 11 secrets of viruses from salty dough for the cobs, how to help you create more beautiful robots and lie down with the robot.

Channel: Small at once with children

Recipe for salt dough for virobs:

• 1 bottle of boros
• ½ vials of water
• ½ bottle of salt
• roslinna olia

Visipaєmo in a bowl is rich, strong, vilivmo water and it is rich. If you come out with a rapt, you can find a lot of water, then give it a trocha borosna. Ma viyti is similar to plasticine.

1. The first secret is the secret to the dough, to keep the figurines, and not to fidget when dry.

An even more frequent problem is virobiv from salty dough in the fact that when the stench hangs, it fixes it. Well, didn’t you see it? It didn’t dry out and didn’t crack; Add ½ teaspoon to the proportions.

2. For this purpose, a figurine is ready from a salty paste of a bula of a non-breakable and unbreakable, it is necessary to add, when suspended in salt, just on the specified food proportions of 2 tablespoons of trellis glue or PVA glue. Todi Pislya Visihannya Figurka Will Become a Metropolitan

3. Whenever the test is carried out and you see it, it’s too dry and when it’s broken at a new dry edge, to wet the water's finger and wipe it with a single finger just in the rose. Writing a lot of good things. Repeat if necessary.

4. It is just necessary to be able to get to such a world, but it doesn’t look short on the dot. Vimishuvati solone is very much needed even more. More beautiful than vimіshuvati in small portions, schob shmatok revenge in rutsі. For that, when you see it, it just became smooth, clean it up in cellophane and in the refrigerator.

5. As soon as there is a lot of lipiti from the dough and the farthing of the gouache, then the rosefarbo robot needs to be varnished. Lacquering the surface of the land I am ready for the robot in the form of a vologue, and I will add the juice of the farbs.

So, as children cannot do it with varnish, then for children it is more beautiful in front of the front to grow it, and for farbuvannya vicoristovuvati kharchovy barvniki. Schob zabarviti tisto, it is necessary to flatten the wad, put dry grub in the middle of the trocha, soak your finger in the water and moisten the barvnik. Take a small amount in the breast with a barvnik in the middle and fix it. Just a barvnik vimishuє shvidshe, von m'yakshe and elastic, not very vivid.

6. If the farbuvati is ready to use gouache, then, in order not to bother your hands, it is necessary to add some PVA glue to the farbuvati.

7. If you repair the lipiti from the test, after having opened the layer, shake it on a new trough, it is necessary to wet your finger with water and smear it on the trough. The surface of the maybutny virobu is guilty of being ideally equal. The appearance of a trishchin zazvychay means that it is just nasty vimishati.

If the tricycle appeared on the finished figurine, then drop it on the trough of water, and then it went numb in the middle and carefully smear it to smoothness. Water can help seal the junction.

8. The size of the product is not less than 3 mm.

9. As soon as you rotate the flat figurines, if the robot is already ready, turn on the oven at the smallest heat and, without closing the oven, dry it again. Lead, stench bloat and lose shape. You can often feel glad about those that dry robots can be done on batteries. However, the battery is drying out even more. Above, you can dry up, alter in the middle there will be sire, and in the future you can get angry or deform.

10. Pislya displaying a flat figure of the land to travel nervously and shorts. Soak your finger in water and smooth the edge until smooth. Todi the figurine herself will be worthy of the fact that she can be a gift and not be ruined.

11. When the figurine is viral, it is possible to "drag" below it: it is just possible to reach for it. Virizati need to press through with ruffs, against it along the perimeter of the figurine.

At the video master-class you can also marvel at how to create a new self-box from salty paste - a yangolyatka figurine for decorating packaging with gifts.