Skargi for the quality of electricity. Low stress in a hemline - an overview of methods in the control and options for stabilization of a stress

In the phenomenon of low springs in the electrorezine there were a lot, especially the residents of the private sector. However, small apartments are not insured for any problem. Shcheb її virіshity, it is necessary, persh for everything, because of the blame for the fall of the spout - the head of the electric power industry, who is it? For what else, it is possible to live in different calls.

Why is there a lack of support?

If the spills are lower than the norms, the blame for inappropriateness. Enlightenment can become in the region of darkness. Prannya, getting ready to eat on the electric plate appears to be uncomfortable, the refrigerator is disgustingly functional.

Such a picture is spared in case of critical failures. Ale і at 180 V, unaffected by those who prodovzhuzh technology protsyuvati, to cope with their zavdannymi all over the place.

The duties of the electric power supply manager include the provision of services for the approach to the upcoming standard: the grids at the input of 220 V with allowable outputs for the large and the smaller side by 22 V.

Violation of the standards for trapelling due to new circumstances. One of the most important ones is the fact of the old line of power transmission. Besides, the technical servicing was carried out badly, irregular repair robots become the cause of the possession.

In some cases there are pardons and inaccuracies when planned lines, as inherited ones, one phase appears to be reversed, and it does not give a proper strain.

The survivors can also create a situation with an unstable spring. Explain the price of a bit of luck you can put in a lot of effort.

Earlier, before the power supply workers, there were 6.5 A for the supply of electricity, now, for a skin apartment at resemblance fell in the middle of 1.5 kW. Today, such indicators are clearly no longer vistacha.

Failures can be made in the course of time, if the power supply grows rapidly during the winter period with the included significant number of electrical units. During the summer period in the dacha sector, growing up is growing at the last days.

De Gerelo?

When staying in apartment booth for in the private sector it is possible to start with an offensive rank. A few tips and tricks to learn about these problems. Yaksho won є, then shvidshe for everything vinuvatsem є the head. If you are dumb, then cause low pressure varto shukati for yourself.

Varto try to turn on all the power supplies and use a voltmeter at the inputs. For all purposes, a car tester is needed. Yakshcho indicators came back to normal, and after the sound of the turn-on, the springs fell again, the reason for the shukati was at home.

It is possible, but a lack of it, is the provider’s retinue at the input of the electricity to the booths. At boundary navantazhennyah thin wiring emerge as a cause of non-staggering.

The filthy contacts on the scruffy and on the thirteenth time at the entrance to the booths can also serve as a reason, for the odd description. Be-yake fall off the beaten path until the heat is seen. In the future, the fact may be that the wiring is burnt out and it may be damaged.

As soon as the guilt lies on the leader, then the guarantee of a quick turn of the indicators to the norms of the trocha. Most of the food is lost without hassle, some of the solutions are connected with expensive calls on the power line: by replacing the wires on the line or all the transformer at the station.

Possible solutions to problems

If the power company doesn’t lose sight of the big people from the drive, don’t install a straining transformer and don’t change the power supply to the power supply, the decision is to be taken on an independent basis.

One of the solutions is in the area of ​​the three-phase power supply system, for whom it will be necessary to call from the company. For the purpose of utilization, a re-pump will be installed on the introduced electricians, so that it is possible for the vicarists to enter a new phase.

Apparently, these are the ways to address the problem of low stress:

Addition and installation of a stabilizer will help you to fit in from employees, for an insignificant period of time. Varto pam'yatati, which stabilizer kostu is not cheap, and with a similar possession of sousids, you can see marnims of their functionality.

Installation of a transformer with suitable parameters. In case of instability, the situation can be determined, if the movable transformer has brought its value to critical changes, then it will be necessary to bring about the bridging of the attachments. When you get such a result, go, get stuck on the relay, open the electric lance when you reach the limit.

Adding a re-twist to the sprinkle, scho I am accumulating energy. Ustatkuvannya can be even more expensive, ale maє visku dіevіstyu.

Zdatne to ensure optimal parameters of the struma and harchuvannya be-like a friend when the electricity is turned on. The essence of the robot is similar to the perfect fit for the PC, but there is a lot of pressure.

The control of the pressure value, which can be approached, can be done behind the aid of the sensor for the low pressure strum. In the case of small annexes, the indicators of the upper and lower thresholds have a clear indication of the upper and lower thresholds;

It is important to remember that the self-sufficiency of nutrition for the reduction of stress in the framing, for the loss of a weak transformer and inadequate connection of wires, is hardly possible.

At the meaning of the situation, more than a dozen at a time (one trip, or go to the street) and turn with a collective application to the company to deal with the supply of electricity. Food about those who work at low pressure in the fancy, you can try it in ways that mean it, for the reason, that you are happy with it.

Photo of a low sponge in a fringe

Inhabitants of the private sector are often stuck with a low pressure; in small apartments, a problem can arise. First for everything, follow the zyasuvati, whose wine is here - the leader of the electric power, or who lives there, in the fallowness of the cause, in the living call.

Lack of pressure in the booth - can be the reason

A low napruga in a fancy is an inappropriate phenomenon, and a little else I can think of it a lot. Unclean illumination, if the light bulb only means its presence, but not itself great bida... Girshe, if it’s uncomfortable to viprati, boil water, cook it on the electric stove, the refrigerator is working intermittently. Don't be fooled, if the pressure drops to a critical value, ale і 180 Volts, if everything is good, there may be little joy. Adopt the same strum, as under normal pressure, but the movement is even greater, but it will take more than a trivial hour to display its functions.

The supervisor of the electricity supply for the production of servants who meet the standards: 220 V at the entrance to the apartment with permissible outputs 198-242 V. Why should the standards be broken? One of the reasons is the old lines of power transmission, the lack of service, repairs are carried out rarely. Ustatkuvannya is often worn out, old and not visible to recent vimogs. Likewise, there are pardons for planning lines of power transmissions, delivery to weekdays, if one phase is re-entangled, іnsha is not entrusted.

The reasons are also to be scolded in the rescuers themselves. Just for the radians' hours before the chiller stood at 6.5 A, that meant that the bag could live up to a maximum of 1.5 kW at one time. Infectious one kettle weighs 2 kW, and how many other side-by-side attachments, which are suitable for electric tools, are in a day-to-day booth? Also, the seasonality of the life of electricity is promoted, which means it grows in cold weather, if you turn on the electricity. At summer cottages, growing up is growing on the wicked, the effort is not enough, the pressure is less than necessary.

Who is Vinen - the headmaster or is it okay?

Nasamper z'yasovuєmo, hto blame for the lack of spillage. In a small apartment booth, it’s even simpler, it’s not possible to power up the susides, who do not have similar problems. Yaksho is dumb, the reason is shukamo in yourself. In the private sector, there are people who are connected to the booths until this phase. Wondering at the electricity, zapam'yatovuєmo, from what kind of wires and what is introduced to the vlasny booth, shukaєmo booth, to live from the same wires. You can also turn on all the attachments, if you please. It’s okay, and when you turn on the decal, it’s the reason to cry in the booth.

If the spill falls into the booth itself, then cause the offensive:

1. 1. Lack of input. Thin drill є the cause of low tension in the hem, especially at maximum load
2. 2. the contact at the input, opening the negative opir, through the fall of the spring. Vtrati can be significant.
3. 3. Inaccurate display of the wire from the line to the booth. The rotten contact on the scrolling advances the opir, and everything is displayed as before.

Padinnya springs supravodzhuetsya vidіlennya heat. With a lack of overriding wiring, the price is not scary, so it’s warmly distributed throughout all the wiring. As nasty contacts, traces can be the most unacceptable. Tse mice will be intensively heating up to the point where the wiring is burned out, a little bit too hot. As long as the problems are tied up with the power company, then it is easy to build up, if you want to eat, it’s easy to write.

For the sake of everything else, it’s often folded, often the leaders don’t respect the lowered stress in the hem, which is also due to the expensive robots carried out on the LEP. You can, at the connection from the changing electricians, the transformer of the changeover station, and the necessary replacement. To trample, but the dart of the LEP was laid a long time ago, and now it is not necessary to satisfy the adults, it is necessary to carry out reconstruction. One more reason is broadened - the unsettled rozpodil navantazhennya transformer phases.

Providers with malim overruns are typical for garden partnerships, and for the private sector of the place is such a problem. On the right in that, a few dozen rocky in that on the LEP vikoristovuvalued cheap steel-aluminum drit. Win Todi satisfied with the obvious consumer, and now the stench has grown significantly. I will grind the 16 mm dart 2 not whistling yet. The characteristic familiar low pressure of the transformer or the lack of overhaul of the providers є lowered the pressure during the day and on the second move to normal at night.

It is practically unwise to bring the transformer to a lack of tension, or it is not practical to arrange it correctly in phases. At any given hour, you can try to rewire the hem, then you can learn. The manifestation of subsidence spills is of a non-perpetual character, and people who live together are often brought up to a problem on their own. It is necessary to write an energy company for a scarg, but it is necessary to do it yourself.

Drawdown napruga - private solution to the problem

As soon as you reconnect, how the springs of the home are falling through the problems of moving from the LEP to the booth, then it’s robimo deyaki. Viewed from the main line of electrical transmissions. Duzhe often won’t be viconano zychaynoi twisted, scho to create a support to a non-winegrowing growth. Tilky garne cooled from the open sky, dart from fired. Z'єdnannya vikonuєmo, vikoristovuchi certified zatiskachi.

In some cases, give the twisted aluminum darts of the line and the middle introduced into the booths. Misce z'adnannya two different metals get very hot, twisting minyaemo on a paddle or Clemnik.

Yaksho z'єdnannya viconano with clamps, I will respect the whole body. The surface is melted against the contact. As soon as it turns on the borderline, then it’s dimmed, and it’s hidden all the way, when the subsidence of the spout is going into a quieter, but it’s going to be new. There is a similar problem to be found on the upper taps of the input machine. The attachment is with pidgoril contacts, we will melt the body in a minimal way, and the contacts will be tightly tightened.

Yakshho the energy company has gone without respect, declare the baggage, not change the transformer for a more tedious one, but the main darts for a greater repetition, it will be done independently. Electricity managers, who are assimilating the problems, are not willing to go for such a crock because of the need for money. One of the ways of a partial solution of the problem is the introduction of three phases to the booth, for which it is required to deliver the energy. As soon as it is trimmed, a phase change is put on the input, and if necessary, it will be closed.

Find out and find out how to solve problems in private:

1. 1. Installed on its own introduced a stabilizer for springs, even if the duration is up to 160 V, the attachment may appear ineffective. Good stress stabilizer is expensive. If you switch on a dozen other attachments along the street, a framing in the bottom to the border, the stabilizer will appear as a marnim.
2. 2. Installing a movable transformer, having changed all parameters. On the right, in that the drawdown is unstable, and if the stress returns to normal, the transformer will go up to such a value that all the attachments of the annex will burn. Schob uniknuty tsogo, put a relay, yake rose lantsyug when reaching the boundary threshold.
3. 3. Vstanovlyumo on the grounding of the zero wire. In this rank, the definition of zero and all wiring as a whole is reduced. It’s not safe,. It’s still better, if you see zero on the power transmission line, the current goes through the ground, you can even more serious inheritance.
4. 4. For a private booth with sufficient resources, it’s possible to redecorate naprugi, like a lot of energy. Tse samiy radical way take a spill, shake off all the problems, ale kostu and possession to finish it is expensive: from 3 to 20 yew. dolar_v.

Such pristіy will become uncomfortable ideal parameters the struma in the framing, the life of the living with the electric power when it is connected. Vono, for the same principle, as an uninterruptible power supply for a computer, ale can be done more powerfully from 3 to 10 kW. The attachment is a small electronic link with a diesel generator, which automatically starts up in the event of a loss of electricity. Alle the launch of the vidbuvaєtsya in a dozen hour, I will add a battery of vikoristovuyutsya.

Still one, at first glance, there is a paradoxical way to covet a normal spout - a viciously lowering transformer. The fault is to blame for the change in pressure between 12-36 V, the tension of 100 watts of the display window is 0.5 kW, and 1 kW of the tension is 5-kilowatts of the voltage. The lower winding is pluggable to the hedge, in the presence of the parameters of the transformer we can accept the additional 12-36 Volts. If you want to avoid overloading, it is optimal to use a 24 V transformer, and even more beautifully put a relay on the inputs.

Self-reliance on power supply with pivot springs in the framing, as well as a weak transformer or lack of wires, is practically uncomfortable. Slid a child to all residents spilo, turn into the energy postal company. You can get to take a piece of vitrat on yourself, and the situation can be trivial.

Low spillage in fancywork is a problem that is typical for home giving in the private sector. 160-180 volts - such a voltage is insufficient for robots of large by-turn power supplies and svitilniks. Putting on the simplest roasting lamp at overwhelmingly low pressure does not light up anymore, but simply "poznacha" your thread roasting with a low-crimson color.

The first for everything, next to the memory, is the head of the power supply of the crop, to ensure the quality of the power supply at the input, so that on the cordon of the communication between the subscriber and the supplier. Due to the fact, the most often the difference between the changes is made at the point of connecting the submarine to the private booth.

To this principle, the meaning of nutrition is: is there a problem in the boundaries of a common zone and a visibility? As on the most submarine, the springs are also low, then there is a general arrangement for the price of the initial organization (the rule of the garden, "Energozbut", etc.) problematic dilyankaє introduction, and even more to be found on the covenant.

It is not easy to carry out the inspection on the support of the submarine at the point of connection in practice, it is not safe. These robots can only be carried out by qualified athletes of the organization-supplier of electrical energy.

For example, if you have problems with your partner, but if you are connected to your phase, you don't see any lack of hands, then you should clearly order those who have a technical problem on your own.

one more characteristic familiar problems on your own, introduced can be the duration of the stay before the inclusion of any electrical devices in your home itself. So, if the opening of the appliance is a strain on the input, and if the stove, the kettle and the pilosos are cleaned at once, then it’s practically impossible to smell the smell, since the drawdown is obvious and it’s possible to navigate without special equipment.

Drawdown of the spring between the cordon

If the drawdown springs to mind itself on your display, then the same options are:

1. Peretin of the introductory guide is a lack of zavdyaki їхній джині. On the back of thin guides, there is a fall in pressure, as in the case of a borderline it can be significant.

2. In lantsyuzi vidgaluzhennya є, which plays the role of a supplementary support. On the whole basis, it is believed to the Ohm's law that there is a fall of tension. Tsikh-something voltіv, "disappear" on nasty contacts, maybe і not vistacati.

Vtrasheni volti become the cause of the visible heat. The first option is not so critical, some of the introductory guide is warmed up for all the good news. And the axis, with the presence of another variant of rotting, the contact will be tight. And even more intensively, right up to the point where the heat will be seen by the everlasting eye. Nagrivannya with a falsified contact, and in the middle of the camp, as a result of the inconsistency of the introduced, or, in a big way, if it is.

Yaksho vi z'yasuvali, when you fall into the booth with problems in your vidgaluzhenna LEP, then the next step will start:

1. Critically assess the contact stan. Tse, in the first place, there is a misconception of the main power line and your vision. Yak vikonano tse z'єdnannya? If for some extra twisting, then it’s worth it, but there’s a problem here and there: the transition to such a contact, which is rooted out from the open sky, grows unhealthy, but because it’s lit, it’s just practical ideally think chilled. Especially, everything is relevant in that case, like twisting the aluminum main and middle Vidgaluzhuvalny providers. It's a pity, also tezh boo.

As soon as you see it for the help of certified creeps, you need to pay respect to the camp of cich cots. The melting and іnshі pozkodzhennya hull blockage may indicate problems with the electrical contact. It is possible to overcome the obviousness of these problems by including borderline options (as it is possible to use more electrical equipment) and by making simple steps. As soon as there is a lull in the midst of a lull, there is a dimming, and the temperature is clearly increasing, then the lull is unambiguously є the reason for the persistence of pressure and the change in temperature.

2. In just one point of a problematic contact, there may be the state of the top of the entry communication device (the most frequent of the machine). In general, the screen can be entered directly from the entrance shield, and the body of the automatic vimikach matime indicates melting. Todi the appliance must be replaced.

Drawdown of the spill in the border between the cordon

At the first glance, to be built, it’s the simplest vipadok: they cooperated with the susids, wrote a skargu - and be a weasel. The head of the goiters will take care of the quality of the electric power, which will be provided according to the law.

However, the fact is that everything is skewed. The reduced spacing in the LEP hem can be tied with the following furnishings:

1.reversing the transformer of the station,

2.Lack of overhaul of LEP conductors,

3. "cross", so that the phase of the transformer is not closed.

The first two causes are not very important to diagnose, it is so difficult to put down: it is necessary either to replace the transformer, or to reconstruct the power transmission line. Until then, the navantazhennya in the net does not become stable, but it means that for the third reason, not everything is unambiguous. Here it goes to mean that this year at a large station is a good relay manager. And this means that the subsidence of the spill through the banal perevantazhennya is characteristic of deprivation for children of gardens and deaf settlements.

Obgruntuvannya that, that the pressure of the transformer is not enough, or that it is nailed in the phases of the rozpodіlen nerіvnomіrno, if it is practically impossible to know. Infection є perevantazhennya or cross, and through pivgodini yogo you may not be. Apparently, the drawdown may be unstable, and the survivors will be left alone with their own problem.

Write "papir" to the address of the Energosbiters in a subset of the situation, zvychayno, treba. Ale robiti yakis kroki independently all one thing will happen. Yak option - in a similar way, you can ask permission from the zbutov company and bring you to the booth. Then you can set on the introduced automatic phase changeover, and if the phase is closed at the current moment, it will be close to 220 volts.

With such permission from Energozbut, it is possible to rotate periodically "phase change" for the participation of electricians operating organization, such as to ensure that it is not necessary to be connected to the train station. It is necessary to mean that such a step is to radically revise the food.

The lack of overreturn of the providers of the LEP often becomes the reason for the stress, and not only in the gardens, but in the private sector in the boundaries of the place. On the right in that, a couple of dozen rockies ago, the line was found by the found wires. Naybilsh widened boules of steel-aluminum darts AS with a resurfacing of 16 sq. mm. Steel will secure the wire, it will not be healthy, but it will also reduce the performance. At the same time, the peretin is 16 sq. mm. And now it is not particularly great, and the aluminum itself does not appear to be high provinces.

On that historical stage, if the electric stove of the boolean was not put into the skinny booth, but those who were hard-pressed to live in the booth were not trimmed, the LEP with wires to the AC-16 was quite enough. And on the other hand, a whole series of palaces are being built on the town of many small daydreams. Moreover, all the more often it is seen that the electric boiler rooms are fired. Zrozumilo, with the help of electrical energy growth in different ways. If a transformer is installed at the station to cope, or if it is replaced, then on thin wires at high currents it will be less stressful.

The characteristic drawback of the overhaul of the power line wires or the strain of the transformer at the station is normal stress at night and there is no drawdown at evening hours. Ale varto respect that two problems often go hand in hand.

De weak darts LEP - there is a low-energy transformer. And put down the problems and the need for great capital investment. One transformer is close to a million rubles, in the absence of this effort. Until then, the reconstruction of the LEP with the vicarians of the SIP can be “worth the coin”.

The axis of the reasons for power generation companies, administrative gardens and settlements can be taken care of by the rocks when obvious problems are evident.

There are the following ways to privately address the problem of low tension in the hem:

1. Installation on sv_y introduction. It’s honestly, it’s going down at times of up to 160-180 volts in total. In the first place, a stabilizer of such a great stabilization and suitable for home-grown exertion will be even more expensive. And in a different way - a dozen of such stabilizers in the LEP netting - and the netting literally falls on the knee, the stars will not take any stabilizer anymore.

2. Installation of sliding transformers at the input. There is no way to go. Well, we installed a transformer, having changed the conversion efficiency from 160 to 220 volts. And the wrinkles in the netting came back to normal, and the replacement of 220 volts in the sockets became 300 volts. Attach all light bulbs to light. Also, the problem with precipitation is that the drawdown is not stable because the drawdown is not stable.

3. Installation of an additional grounding attachment at the input. Zrozumіlo, on a zero working guide. The sensation here is that the LEP line is a straight conductor (phase) and an eccentric (zero). Peretin may be a disadvantage for both, but, having grounded the null conductor, it is possible to change the operating zero reference and in the whole line may decrease. However, such a visit may be fraught. First for everything, Tim, let's get an hour to repair at any point of the electrical line, we can go to zero and phase in a few steps.

In a similar vipad, the phase is grounded by the cause of a short flicker. The first option is shaving the working zero on the LEP. Todi all robotic strumms go through your grounding attachments, which can lead to unpredictable results. If you are short of grounding annexes, you will just see it out of the way.

Behind the bag, it will happen that there is no independent radical solution to the problem of stress subsidence through the weakness of the transformer of the station, but rather the thin wires of the power transmission line. Alone in the field is not war. It is necessary to get together with the susides, to store the beast at the address of the energy organization and to prepare it before the brothers fall on ourselves. On the right, you can tighten up to infinity.

Oleksandr Molokov

One of the most frequent problems of power supply in Ukraine is the lack of congruity, in which there are more problems, it is more likely to be low. The article was given to allow the knowledge of the cause of the diagnosis and the inflow of reduced stress on the electrical attachment, as well as to propose the optimal methods for usuning the given problem.

1. The reasons for the decrease in sponginess in the hem

According to GOST 13109-97 "Standards for the quality of electrical energy in the systems of electrical power supply", it is allowed to trivially display at equal ± 5% and short-time borderlines ± 10%. In an hour, it is not easy to think of a decrease in pressure as much as 50% to the lower side, most often it is seasonal, but there are some drops, if the amount of hem is consistently not consistent with GOST.

Zooming seasonally and constantly decreasing the level of springs:

Power transmission lines. One of the main reasons to cry in the old lines of power transmission, as there is a great number of so-called "twists", de often a weak contact is prevented. There are a lot of laws to this.

Transformer stations. The need for foodstuffs was laid down in the USSR, obviously, the engineers of that hour were too busy to transfer the growth of the number of living and out-of-town living needs, however, the hour of possession is great, but it’s a lot of things for a long time.

Tightness is unbalanced. In the case of a large number of transitions, a single-phase hedge is introduced into the booth and apartment, or even more than one of the three arms of a three-phase hedge. In case of improperly balanced imbalances in the skin phases, phase reversal will be prevented, which may lead to an increased or decreased stress.

Vishchevkazanі reasons even more often sposterіgayuyutsya at once і usunennya deprived of one of them lead only to a private polіsshennya. Especially strongly they are hungry for the power supply, as they are in the end of the TP line;

2. The inflow of low springs on the electrical attachment

Loss of characteristics for starting engines and compressors;

Zbіlshennya struma when starting engines and compressors;

Overheating of wires and breakdown of insulation;

Reduced illumination quality;

Fast term of service;

Destruction in robots;

Decrease in exploitation characteristics.

Apparently, with an inaccurate electrical supply in the first place, there is a lot of electrical support. Refrigerators and air conditioners, in warehouses such as compressors, as well as hand-held machines and all-in-one attachments, de moving, also recover a hundred loss at start-up. Especially less can the sufferings of the electronic helpers, or even in any kind of problem, there can be a risk of assaults in the robots or the wrong modes of the robots.

Lyudin, as a creepy little one, will also respect the inflow of low pressure, the heating equipment is higher than the necessary temperature, with the refrigerator or the air conditioner, you can see the sounds of the outside, but especially in people who are on guard.

3. Methods for stabilization of springs in the hem

Claims for energy management. For the preparation of a claim about the lack of energy provision of the object in krai bazhano mati, there is a fact that it is possible to fix it for an additional special attachment - a restorer of electrical parameters in the grid. Daniy prilad is guilty of the certification and the establishment of the situation without the need for the problem. Fixing the drive I will write the tribute to a memory card or to a hard disk of a personal computer, for which graphics can be opened and edited as proof. If the claim sheet is filed with the organization, there is an agreement for a lawyer to help you, and if you see a problem, it is possible to file the poses before the court. Speed ​​up the process of collective claims by residents of the street, the quarter or the apartment booth.

The problem in the 160-180 volt electrorezine has been broadened even further, as it is known to the owners of private houses and cottages. Such a weak pressure is not enough for the normal functioning of the lighting attachments.

Well, it's really easy to blame for the problem. If there is a lack of energy to be fed to the line of power transmissions, then the fault lies with the servitor, and if the problem is deprived of being sent to a private office, then it will be helpful.

It is possible to reconsider what the cause of the lack of tension is in itself, turning up to the suspicion of lying down. It’s an analogous problem - it’s not a turbine, but it’s clear that the drawdown is not going to happen on the way to the house.

The main fault of the introduction of electric power є Rizke Padinnya springs at one hour included in the hem of the attachment to the high energy supply. Everyone knows the situation, if you put the switch on or vibrate automatically on the dashboard.

Perche, You can fall through the back of a small cross-section of wires. Thin darts do not showcase a great deal.

In a different way The drawdown can be seen through the nasty contact at the end of the day. Such a contact is established in the form of an opir in the framing, through which and decrease in the endowment.

It is not safe to have such inadequacies in the freezing of the wires, or the loss of contact, as if to pretend to be lost in the fringes. In the event of an unjustified contact, you can bring the booth to an all-too-red light, or to light-up.

More often than not, the transmission line and the introduction of the transmission line are often found in a twisted way, which is not an unbeatable option. In such a way, as a result of a poignant fire, the gentlemen in the booth are not naturally cooled off.

In the ideals of the LEP and the introduction, he is guilty of the additional tampering, which is safe and superior to all the other options. However, most often it is possible to find a factory run-of-the-mill in a non-conformity and in a heat-sensitive condition, which is promoted at the maximum wiring voltage. Madly, having discovered an inequality, the clamp is required to change the term.

In some cases, the disparity to the contact appears on the annex, such as the bottom flap of the booth and the conduct of the visit. In such a vipadku, stick in the waste of the springs can be deprived of the nobility by replacing the outbuilding.

The drawdown of the tension on the power lines, for which there is no indication of the efficiency of the power supply manager, can be promoted in vipad:

1. Overloading at the station.
2. Lack of wire reattachment on the line.
3. Invalid phase changeover at the plant.

For the current year, although it is also practical for all old stations to be replaced with new ones, it is practically unwise to change them. The price is tied to the installation on the current models of an effective relay switch. Outdated pedagogical stations have lost their practice in most recent villages and settlements... Usunennya subsidence through perevantazhennya can be deprived of a path to replace without a middle station.

The recession of pressure through the inconsistency of the navantazhennya phases at the plant is unstable, as it will be even more difficult to bring the residents of the private sector.

Lack of overhaul in power lines is the most common cause of low stress. On the right, for a long time, such darts were vibrated for equipping through their small part.

A few dozen rockets to that, such a cross-over was spent just enough for the normal energy supply of the private sector. Now, since practically everything is working on the electric power, the darts have not become a showcase for any additional options and will be replaced. There is a problem, especially in the daytime, if all residents immediately use the power supplies, and at night the situation stabilizes.

Crazy, the leader is guilty of problems on the power line communal servants Alas, it's a pity, there are plenty of residents of the private sector to live with the lack of resources, and even the cost of replacing the station or spending even more expensively. We can only resolve such problems as a collective list, in which the guilt is not only about passing food, but about the quality of the services, how much energy is expected.

In tandem with the price of the article, we will learn about the video-supplements:

Yak yourself, put the chandelier in the booth UZO - pardons when connected